Package comes with the Main Panel, 4 x Keychain Remote Controllers with panic button, 2 x PIR Sensors, 8 x Door Sensors, Power Adapter, 1 x Siren Alarm and user manual.
The door sensors are battery operated which are provided in your kit.
It is easy to add additional wireless cameras or accessories if required.
The unit works on DC 12V / 1A power supply and the backup is provided by a rechargeable 7.4V Lithium battery. If the power supply fails and back up is activated, the system will send a text to let you know. The wireless signal range is between 100 and 150 meters in an open area, and 30 meters indoors. The system can work in temperatures of between -20℃ to +55℃.
You will not need a landline for this system, as a GSM system only requires mobile phone.
A sim card will need to be purchased additionally. This is easily installed into the back of the main control panel. Clips are also available on the back of the panel should you wish to install any wired sensors.
The Home Security System Professional Wireless GSM provides an incredible 8 wired and 99 wireless defense zones this system. So this really is a great low cost choice for all your surveillance needs. You have flexibility with 3 groups of timely arm and disarm options. All operations including sounding the alarm and sending alarm messages can be activated by a voice prompt. The system will store up to 6 phone numbers, which will be called automatically if the alarm is triggered. The main device has the facility to send text alarms to two phone numbers. Calls can be made using the keypad on the alarm panel.
The LCD screen with time clock display makes the main panel easy to operate in the dark.
An instruction manual is provided to guide you through the step by step process. At the back of the book you will find a list of codes to use. We recommend you take a look at these before you start reading the manual, as the instructions will be easier to understand.
Start by inserting your sim card (not included) into the back of the control panel. Plug into your power supply and the display will illuminate and you will see a red and a green light come on. The flip down panel will reveal the keypad and you can set the time. All functions have a code, so check the back of the instruction manual and find out the code you need to enter to set the time. To start set up there is an additional four digit code. Enter the four digit code followed by the hash key. The device then gives an audible command asking you for the function code. Enter this (from the back of the book) and press the hash key. This procedure applies whenever setting something on the system.
There are no monthly charges.